Projectors
Piped to a Projector, Wave Plasma recreates the totem's Base powers as a second aura somewhere else.
Setting one up
Run a cable into one of the four sides of a 
Projector Base, and stand a 
Projector on top. The projector works for whoever owns the totem: if your totem is stolen, so is the aura.
Powers it can receive
Fortify, Healing Aura, Alarm, Ward, Sanctuary, Cloaking, Recall and Anchor, at the highest level any totem on the interface has.
A projector receives two powers at once, three with a 
Channel Expander fitted by right-clicking the projector with it. Sneak and right-click empty-handed takes it out.
The projector's screen
Right-click the projector:
- POWERS lists what the interface offers, with a RECEIVE switch for each.
- CHUNKS is the chunk picker, when it receives Anchor. See Chunk loading.
- STATUS shows the pressure.
Plasma it needs
A projector needs 100 mB/t arriving. It runs on plasma alone, no RF. The base holds 5,000 mB and the projector burns 20 mB/t of it, so a base that was full keeps its projector going for about four minutes after a cable is cut. A base with nothing feeding it and no projector drains by itself.
Behind a Plasma Repeater, a projector receives one power at full level, or two or more each one level lower per repeater.
Recipes
Describes BSP-Core 1.6.2. Numbers are the defaults; the server's settings may differ.